| Standard |
Category Reference |
Title or Description |
| Holiday Testing |
Tape Coating Systems for the Exterior of Steel Water Pipelines |
|
| Holiday Testing |
Coal-tar protective coatings and linings for steel water pipelines - enamel and tape - hot applied |
|
| Holiday Testing |
Fusion-bonded epoxy coating for the interior and exterior of steel water pipelines |
|
| Coating Thickness Non Destructive |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware. |
|
| Coating Thickness Non Destructive |
General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994) |
|
| ASTM B 117 |
Corrosion |
Standard Practice for Operating Salt Spray (Fog) Apparatus |
| Coating Thickness Non Destructive |
Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments |
|
| ASTM B 287 |
Corrosion |
B287-74 Method of Acetic Acid-Salt Spray (Fog) Testing (Withdrawn 1987) |
| ASTM B 368 |
Corrosion |
Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| Coating Thickness Non Destructive |
Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals. |
|
| Hardness |
Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
|
| Coating Thickness Non Destructive |
Measuring Thickness of Metallic and Inorganic Coatings |
|
| Washability, Brushability & Abrasion |
Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic |
|
| Washability, Brushability & Abrasion |
Test Method for Weather Resistance of Slate |
|
| Washability, Brushability & Abrasion |
Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic |
|
| ASTM C 321 |
Adhesion Testing |
Bond Strength of Chemical-Resistant Mortars |
| Gloss |
45-deg Specular Gloss of Ceramic Materials. |
|
| Washability, Brushability & Abrasion |
Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
|
| Gloss |
Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric (Withdrawn 2002). |
|
| Adhesion Testing |
Adhesion or Cohesion Strength of Thermal Spray Coatings |
|
| Coating Thickness Destructive |
Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
|
| Washability, Brushability & Abrasion |
Test Method for Resistance of Transparent Plastics to Surface Abrasion |
|
| Viscosity |
Test Methods for Viscosity of Adhesives |
|
| Viscosity |
Test Methods of Testing Rosin Oils (Withdrawn 2003) |
|
| Coating Thickness Non Destructive |
Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base |
|
| Viscosity |
Test Method for Viscosity by Ford Viscosity Cup |
|
| Fineness of Grind |
Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage |
|
| Wet Film Thickness |
Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
|
| Fineness of Grind |
Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer |
|
| Coating Thickness Non Destructive |
Nondestructive Measurement of DFT of Nonconductive Coatings Applied to a Nonferrous Metal Base |
|
| Gloss |
60° Specular Gloss of Emulsion Floor Polish. |
|
| ASTM D 1475 |
Density |
Test Method for Density of Liquid Coatings, Inks, and Related Products |
| Viscosity |
Test Method for Vicat Softening Temperature of Plastics |
|
| ASTM D 16 |
General |
Terminology Relating to Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1730 |
Surface Preparation - Non-Ferrous |
Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| Elongation & Resistance Deformation |
Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn) |
|
| Surface Preparation - Steel |
Guide for Treatment of Zinc-Coated (galvanized) Steel Surfaces for Painting |
|
| Viscosity |
Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer |
|
| Surface Preparation - Steel |
Pictorial Surface Preparation Standards for Painting Steel Surfaces |
|
| Hardness |
Test Method for Rubber PropertyDurometer Hardness |
|
| Film Application & Test Charts |
Test Method for Freeze-Thaw Resistance of Water-Borne Coatings |
|
| ASTM D 2246 |
Corrosion |
Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992) |
| ASTM D 2247 |
Corrosion |
Testing Water Resistance of Coatings in 100% Relative Humidity |
| Gloss |
Specular Gloss of Plastic Films and Solid Plastics. |
|
| ASTM D 2486 |
Washability, Brushability & Abrasion |
Test Methods for Scrub Resistance of Wall Paints |
| Viscosity |
Test Method for Wetting Tension of Polyethylene and Polypropylene Films |
|
| Hardness |
Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
|
| Elasticity & Resistance Deformation |
Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
|
| Film Application & Test Charts |
Test for Leveling Characteristics of Paints by Draw-Down Method (Withdrawn 1987) |
|
| Appearance |
Test Method for Hiding Power of Paints by Reflectometry |
|
| Adhesion Testing |
Evaluation of Coatings Applied to Plastics |
|
| Coating Thickness Destructive |
Evaluation of Coatings Applied to Plastics |
|
| Film Application & Test Charts |
Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
|
| ASTM D 3258 |
Appearance |
Test Method for Porosity of Paint Films |
| ASTM D 3278 |
Flash Point |
Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| Fineness of Grind |
Test Method for Relative Tinting Strength of White Pigments by Visual Observation |
|
| Adhesion Testing |
Test Methods for Measuring Adhesion by Tape Test |
|
| Hardness |
Test Method for Film Hardness by Pencil Test |
|
| Washability, Brushability & Abrasion |
Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
|
| Film Application & Test Charts |
Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts |
|
| ASTM D 3450 |
Washability, Brushability & Abrasion |
Test Method for Washability Properties of Interior Architectural Coatings |
| Viscosity |
Standard Guide for Testing Coil Coatings |
|
| ASTM D 3828-IP303 |
Flash Point |
Test Methods for Flash Point by Small Scale Closed Tester |
| Fineness of Grind |
Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller |
|
| Washability, Brushability & Abrasion |
Test for Powder Resistance of Floor Polish Films (Withdrawn 1977) |
|
| Washability, Brushability & Abrasion |
Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
|
| Coating Thickness Destructive |
Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means |
|
| Washability, Brushability & Abrasion |
Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion |
|
| Viscosity |
Test Method for Viscosity by Dip-Type Viscosity Cups |
|
| ASTM D 4213 |
Washability, Brushability & Abrasion |
Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| Surface Preparation - Concrete |
Practice for Surface Cleaning Concrete for Coating |
|
| Surface Preparation - Concrete |
Practice for Acid Etching Concrete |
|
| Surface Preparation - Concrete |
Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating. |
|
| Surface Preparation - Concrete |
pH of Chemically Clewed or Etched Concrete Surfaces |
|
| ASTM D 4263 |
Surface Preparation - Concrete |
Indicating Moisture in Concrete by the Plastic Sheet Method |
| ASTM D 4285 |
General |
Test Method for Indicating Oil or Water in Compressed Air |
| Viscosity |
Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer |
|
| Hardness |
Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests (withdrawn) |
|
| Wet Film Thickness |
Practice for Measurement of Wet Film Thickness by Notch Gages |
|
| Surface Preparation - Steel |
Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
|
| ASTM D 4537 |
General |
Guide for Establishing Procedures to Qualify and Certify Inspection Personnel for Coating Work in Nuclear Facilities |
| ASTM D 4538 |
General |
Terminology Relating to Protective Coatings and Lining Work for Power Generation Facilities |
| Adhesion Testing |
Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
|
| Holiday Testing |
Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates. |
|
| Washability, Brushability & Abrasion |
Test Methods for Practical Washability of Organic Coatings |
|
| ASTM D 5064 |
General |
Practice for Conducting a Patch Test to Access Coating Compatibility |
| ASTM D 5071 |
Corrosion |
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
| Powder Thickness Measurement |
||
| Holiday Testing |
Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metal Substrates |
|
| Adhesion Testing |
Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing. |
|
| Elasticity & Resistance Deformation |
Test Methods for Mandrel Bend Test of Attached Organic Coatings |
|
| Gloss |
Specular Gloss. |
|
| Washability, Brushability & Abrasion |
Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration) |
|
| Viscosity |
Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
|
| Washability, Brushability & Abrasion |
Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration) |
|
| Washability, Brushability & Abrasion |
Test Methods for Electrical Resistivity of Liquid Paint and Related Materials |
|
| Surface Evaluation |
Evaluating Degree of Rusting on Painted Steel Surfaces |
|
| Film Application & Test Charts |
Test Methods for Measuring the Hiding Power of Powder Coatings |
|
| Adhesion Testing |
Test Method for Evaluating Adhesion by Knife |
|
| ASTM D 711 |
Drying Time - Traffic Paint |
Test Method for No-Pick-Up Time of Traffic Paint |
| Film Application & Test Charts |
Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
|
| Viscosity |
Method of Sampling and Testing Pine Tars and Pine-Tar Oils (Withdrawn 1991) |
|
| Washability, Brushability & Abrasion |
Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
|
| ASTM E 1907 |
Surface Preparation - Concrete |
Determining Moisture-Related Acceptability of Concrete Floors to Receive Moisture-Sensitive Finishes |
| Climate |
Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures). |
|
| Coating Thickness Non Destructive |
Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
|
| ASTM E 430 |
Appearance |
Measurement of Gloss of High-Gloss Surfaces by Goniophotometry |
| ASTM E 96 |
Drying Time |
Testy Methods for Water Vapor Transmission of Materials |
| Gloss |
Methods for Measurement of Gloss of High-Gloss Surfaces by Goniophotometry |
|
| ASTM F 1319 |
Washability, Brushability & Abrasion |
Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) |
| Washability, Brushability & Abrasion |
Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) |
|
| ASTM F 1869 |
Surface Preparation - Concrete |
Measuring Moisture Vapor Emission Rate of Concrete Sub-floor Using Anhydrous Calcium Chloride |
| Washability, Brushability & Abrasion |
Test Method for Determining the Erasability of Inked Ribbons |
|
| Washability, Brushability & Abrasion |
Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
|
| Coating Thickness Non Destructive |
Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
|
| Holiday Testing |
Abrasion Resistance of Pipeline Coatings. |
|
| Holiday Testing |
Holiday Detection in Pipeline Coatings. |
|
| ASTM G 85 |
Corrosion |
Standard Practice for Modified Salt Spray (Fog) Testing |
| Coating Thickness Non Destructive |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness |
|
| Coating Thickness Non Destructive |
Metallic and related coatings: meas. of coating on magnetic metals |
|
| Coating Thickness Non Destructive |
Metallic and related coatings: meas.of coating on non-mag. metals |
|
| Adhesion |
Paints and varnishes - cross-cut test. |
|
| Holiday Testing |
Vitreous and porcelain enamels - Enamelled articles for service under highly corrosive conditions - High voltage test |
|
| Thickness - Destructive |
Paints and varnishes - determination of film thickness. |
|
| Thickness - Destructive |
Paints and varnishes - determination of film thickness. |
|
| Coating Thickness Non Destructive |
Paints and varnishes - Determination of film thickness. |
|
| Coating Thickness Non Destructive |
Paints and varnishes - Determination of film thickness |
|
| Coating Thickness Non Destructive |
Paints and varnishes - Determination of film thickness |
|
| Wet5 Film thickness |
Paints and varnishes - Determination of film thickness |
|
| Wet5 Film thickness |
Paints and varnishes - Determination of film thickness. |
|
| Gloss |
Meas. of specular gloss of non-metallic paint films |
|
| Adhesion |
Paints and varnishes - pull-off test |
|
| Gloss |
Anodized aluminium and aluminium alloys - Measurement of specular reflectance and specular gloss at angles of 20, 45, 60 or 85 degrees. |
|
| Holiday Testing |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects |
|
| Holiday Testing |
Vitreous and porcelain enamels- Low voltage test for detectying and locating defects |
|
| ISO 8501-1 |
Surface Preparation |
SS 05 59 00. Prep. of steel: visual assessment of surface cleanliness. |
| Surface Preparation |
Preparation of steel surfaces before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localised removal of previous coatings. |
|
| Surface Preparation |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3 Preparation grades of welds, cut edges and other areas with surface imperfections |
|
| Surface Preparation |
Preparation of steel surfaces before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for paintiong (pressure-sensitive tape method) |
|
| Climate |
Preparation of steel substrates before application of paints and related products. Group B. Methods for the ssessment of surface cleanliness. Part B4. Guide to the estimation of the probability of condensation on a surface to be painted. |
|
| Surface Preparation |
Preparation of steel surfaces before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Sampling of soluble impurities on surfaces to be painted - Bresle method |
|
| Surface Preparation |
Conductivity measurement. Salt ug/cm2 = 4000 x change in conductivity of soln uS. Change = [(salt + water) - (water)] |
|
| Surface Preparation |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specs and defs for ISO surface profile comparators for asses. of abras. blast-cleaned surfs. |
|
| Surface Preparation |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surf. prof. of abras. blast-cleaned steel - Comparator procedure |
|
| Surface Preparation |
Preparation of steel substrates before application of paint and related products - Surface roughness characteristics of blast-cleaned steel substrates -Part 3: Method for the cal. of ISO surf. comp, and determ. surf. prof. - Focusing microscope procedure |
|
| Surface Preparation |
Preparation of steel substrates before application of paint and related products - Surface roughness characteristics of blast-cleaned steel substrates -Part 4: Method for the cal. of ISO surf. comp, and determ. surf. prof. - Stylus instrument procedure |
|
| Surface Preparation |
Preparation of steel substrates before application of paints and related products. Group D, Methods for surface preparation. Part D1, General principles. |
|
| Surface Preparation |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile. |
|
| Washability, Brushability & Abrasion |
Anodic Coatings for Aluminum and Aluminum Alloys, Military Specification |
|
| Washability, Brushability & Abrasion |
Test for Carrying Case, Military Specification |
|
| Washability, Brushability & Abrasion |
Ink, Marking, Epoxy Base, Military Specification |
|
| Washability, Brushability & Abrasion |
Marking of Electronic Items, Military Specification |
|
| Washability, Brushability & Abrasion |
Packing, Performed, Carbon and Carbon Stock Packing: Military Specification |
|
| Washability, Brushability & Abrasion |
Test Equipment for use with Electrical and Electronic Equipment, Military Specification |
|
| NACE 6G 186 |
Surface Preparation - Steel |
Surface Preparation of Contaminated Steel Structures (Withdrawn) |
| Surface Preparation - Steel |
Surface Preparation of Steel and Other Hard Materials by Water Blasting Prior to coating or Recoating |
|
| Holiday Testing |
Discontinuity (Holiday) Testing Of Protective Coatings |
|
| Holiday Testing |
Recommended Practice - High-Voltage Electrical Inspection of Pipeline Coatings Prior to Installation |
|
| Surface Preparation - Steel |
Profile Measurement of Blast Cleaned Steel Using Replica Tape |
|
| Holiday Testing |
Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 um (10 to 30 mils) |
|
| Climate |
Dehumidification and temperature control during surface preparation, application and curing of coatings/linings for tanks, vessels and other enclosed spaces |
|
| SSPC Guide 6 |
General |
Guide for Containing Debris Generated During Paint Removal Operations |
| SSPC Guide 7 |
General |
Guide for the Disposal of Lead Contaminated Surface Preparation Debris |
| Surface Preparation - Steel |
Retrieval and Analysis of Soluble Salts on Substrates |
|
| Surface Preparation - Steel |
Visual Standard forAbrasive Blast Cleaned Steel |
|
| Surface Preparation - Steel |
Paint Application Specifications |
|
| Surface Preparation - Steel |
Measurement of Paint Thickness with Magnetic Gages |
|
| Coating Thickness Non Destructive |
Measurement of dry paint thickness with magnetic gauges, Magnetic gauges. |
|
| Surface Preparation - Steel |
Near-White Blast Cleaning |
|
| Surface Preparation - Steel |
Power Tool Cleaning to Bare Metal |
|
| Surface Preparation - Steel |
Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating |
|
| Surface Preparation - Steel |
Hand Tool Cleaning |
|
| Surface Preparation - Steel |
Power Tool Cleaning |
|
| Surface Preparation - Steel |
White Metal Blast Cleaning |
|
| Surface Preparation - Steel |
Commercial Blast Cleaning |
|
| Surface Preparation - Steel |
Brush-off Blast Cleaning |
|
| Surface Evaluation |
Evaluating Degree of Rusting on Painted Steel Surfaces |
|
| Surface Preparation - Steel |
Visual Standard for Power and Hand Tool Cleaned Steel |
|
| Surface Preparation - Steel |
Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting |
|
| Surface Preparation - Steel |
Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning |